User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            General Resistance RTD-100:RTD Simulator
DATE:                  15-Oct-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       6
NUMBER OF LINES:       57
CONFIGURATION:         Datron 1281
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK+                                          X
  1.002  ASK-   R     N              P     U                      F        W
  1.003  HEAD         * STORE ZERO OFFSET *
  1.004  DISP         Set all decades to zero (to measure the zero offset).
  1.005  DISP         Connect decade terminals to 1281 DECADE input terminals
  1.005  DISP         using 4 wire connections.
  1.006  IEEE         [@1281]TRUE_OHMS AUTO
  1.007  IEEE         [@1281][D2000]RDG?[I]
  1.008  RSLT         =Zero Offset =[mem]Ohms
  1.009  MATH         M[3] = MEM - 10
  1.010  HEAD         {* DECADE .001 Ohm/STEP *}
  1.011  MATH         M[1] =  .001
  1.012  TOL          .0100%
  1.013  CALL         Sub Decade 10 Steps CAL VER 1
  1.014  JMP          2.001
  1.015  EVAL   dummy line
  2.001  HEAD         {* DECADE .01 Ohm/STEP *}
  2.002  MATH         M[1] =  .01
  2.003  TOL          .0100%
  2.004  CALL         Sub Decade 10 Steps CAL VER 1
  2.005  JMP          3.001
  2.006  EVAL   dummy line
  3.001  HEAD         {* DECADE .1 Ohm/STEP *}
  3.002  MATH         M[1] =  .1
  3.003  TOL          .0100%
  3.004  CALL         Sub Decade 10 Steps CAL VER 1
  3.005  JMP          4.001
  3.006  EVAL   dummy line
  4.001  HEAD         {* DECADE 1 Ohm/STEP *}
  4.002  MATH         M[1] = 1.0000
  4.003  TOL          .0100%
  4.004  CALL         Sub Decade 10 Steps CAL VER 1
  4.005  JMP          5.001
  4.006  EVAL   dummy line
  5.001  HEAD         {* DECADE 10 Ohm/STEP *}
  5.002  MATH         M[1] = 10.000
  5.003  TOL          .0100%
  5.004  CALL         Sub Decade 10 Steps CAL VER 2
  5.005  JMP          6.001
  5.006  EVAL   dummy line
  6.001  HEAD         {* DECADE 100 Ohm/STEP *}
  6.002  MATH         M[1] = 100.000
  6.003  TOL          .0100%
  6.004  CALL         Sub Decade 10 Steps CAL VER 1
  6.005  END